Manufactured or Fabricated:
A Manufacturer makes the window from raw resins with their own machinery from the beginning to
the end. They design the window just the way they want it.
A Fabricator on the other hand buys extrusions
from Manufacturers (along with other required parts) then puts the window together in their "Factory".
A Fabricator makes concessions in putting them together in this way.
|
Back To Comparison Page
|
I.G. Unit: Insulating Glass Units are two pieces
of glass (double pane) sealed together with a spacer providing a dead space of air or argon gas. They
are considered a Unit because if the seal should break, allowing condensation inside the unit, the unit
must be replaced.
|
Back To Comparison Page
|
Glazing: Glazing is what seals the glass to
the vinyl frame around it, the Sash. It acts as an
access to the removal of the I.G. Unit should it need repair or replacement. It's the trim pieces at the
edges of glass either inside or out. Inside glazing is not exposed to the elements, where
outside glazing is.
|
Back To Comparison Page
|
Interlocking Meeting Rails: Is where
the two Sashes, in either a Double Slider Roller
or a Double Hung, meet. The rails (part of the sash frame) in the middle of either style window. When the
window is closed shut they lock together. This meeting rail lock protects against prying between the
two in order to open the latch lock. It also helps maintain a tighter sealing window.
|
Back To Comparison Page
|
Header and Sill:The Header is the same as
the window Sill only at the top of the window.
|
Back To Comparison Page
|
Weather Stripping:Protects against air
and dust infiltration. The more strips the better the protection.
|
Back To Comparison Page
|
Spacer Type: The spacer is what separates
the two panes of glass in a double pane window. It is sealed to the glass on both sides as to maintain an
insulating dead air space. Foam spacers will typically increase the energy efficiency, however, the direct
sunlight, along with the accordion of glass effected by temperature changes could result in deterioration of the
hermetic seal between the two panes of glass.
|
Back To Comparison Page
|
Equal Width Glass: The width of the glass from side to
side. The bottom sash on some windows are wider than the top sash. This is due to using the same size
extrusions for both the top and bottom sashes.
|
Back To Comparison Page
|
Balance Covers: Covers the Balances in the double hung style windows.
|
Back To Comparison Page
|
Balance Type: Balances provide a constant force to the
double hung style windows so that the window stays where you have opened it to.
|
Back To Comparison Page
|
Screens: Are usually aluminum frames with nylon mesh. Some frames
are extruded, have mitered corners and are rigid. Others are roll-out formed with plastic caps in the corners which make
for a fairly flimsy screen frame.
|
Back To Comparison Page
|
NFRC U-Factor Rating: The
National Fenestration Rating Counsel. Conducts tests for the Energy Star Program. The U-Factor
is the rating for the entire window. The lower the number the better.
|
Back To Comparison Page
|
Relative Price: Relative price lets you know how each windows pricing relates to the other windows on our site.
|
Back To Comparison Page
|
Value Rating: These windows were value rated by John Chipman in order to give you some
guidance in choosing your windows. Though the windows themselves support these ratings, incorporated are things not included
on this chart, including warranty service, price, delivery, and local support. All the windows on this site are better than good quality replacement windows.
|
Back To Comparison Page
|
Sashes: The frames
around the glass, that move, are called the sashes. In a window the sections that move (side to
side or up and down) to open it are the sashes. They move inside the window frame.
|
Back To Comparison Page
|
Extrusions: The parts that make up the window
frames and the sash frames. Are manufactured in long pieces and then are cut down to meet the required
window size.
|
Back To Comparison Page
|
Fusion Welded: Fusion-welded frames provide much greater strength and
durability than frames that are mechanically fastened together. Combined with other quality construction processes, fusion
welding practically eliminates the possibility of air and water infiltrating windows at the corners. Fusion welding
is a process involving heat and pressure. Four-point fusion-welded windows provide the best possible square joint. If done properly,
these joints will be stronger than the original vinyl frame.
|
Swing And Clean Sliders: Caring for swing and clean sliders is a snap with the easy-to-use swing in sash design. The windows unlock easily and effortlessly for easy cleaning and full access. Have a look.
|
Back To Comparison Page
|
